DNV Type Approval Certificate TAE000050C

Certificate Overview

This page provides the DNV Type Approval Certificate TAE000050C issued to Anhui Tiankang (Group) Shares Co., Ltd. for XLPE insulated shipboard power cables with type designation CJ85/NSC, CJ86/NSC, CJ95/NSC and CJ96/NSC.

• Certificate number: TAE000050C

• Rated voltage: 0.6/1kV

• Temperature class: 90°C

• Issued: 2025-01-07 at Hamburg

• Valid until: 2030-01-06

• Issued by: DNV

• DNV Job ID: 262.1-040955-1

The certificate confirms that the cable type complies with DNV rules for classification of ships, offshore units and high speed and light craft. Products covered by this certificate are accepted for installation on vessels classed by DNV, subject to the certificate terms and project requirements.

Approved Cable Types

• CJ85/NSC

• CJ86/NSC

• CJ95/NSC

• CJ96/NSC

These are XLPE insulated shipboard power cables designed for marine and offshore power distribution applications where fire performance, halogen free material and low smoke emission are required.

Cable Construction

• Conductor: tinned stranded copper, class 2

• Insulation: mica tape + XLPE

• Inner covering: extruded for CJ95/NSC and CJ96/NSC

• Armour / braid options: copper wire braid, or galvanized steel wire braid, not for single core cable

• Outer sheath: SHF1 or SHF2 material depending on type

The certificate covers a wide range of core numbers and cross sections, including single core, two core, three core, four core, five core, seven core, eight core, ten core, twelve core, fourteen core, sixteen core, nineteen core, twenty four core, twenty seven core, thirty core, thirty seven core, and multi-core configurations with earth core, for example 3x2.5+1x2.5, 3x4+1x4, 3x6+1x6, 3x10+1x10, 3x16+1x16, 3x25+1x16, 3x35+1x25, 3x50+1x25, 3x70+1x35, 3x95+1x50, 3x120+1x70, 3x150+1x95, 3x185+1x95 and 3x240+1x120.

Fire and Material Performance

According to the type approval documentation, the cable is fire resistant and flame retardant Category A, halogen free and low smoke. The certificate lists compliance with the following main test standards:

• IEC 60092-350: general construction and test methods of power, control and instrumentation cables for shipboard and offshore applications

• IEC 60092-353: power cables for rated voltages 1kV and 3kV

• IEC 60092-360: insulating and sheathing materials for shipboard and offshore cables

• IEC 60332-3-22: vertical flame spread of vertically mounted bunched wires or cables, Category A

• IEC 60331-1 and IEC 60331-2: circuit integrity under fire with shock at 830°C, 120 min

• IEC 60754-1: halogen acid gas content, low halogen

• IEC 60754-2: acidity and conductivity, halogen free

• IEC 60684-2 clause 45.2: low level fluorine content

• IEC 61034-1/2: smoke density, light transmittance greater than 60%

Application

This certificate applies to XLPE insulated shipboard power cables used in marine power and general power distribution systems where DNV type approved cable is required. Typical project areas include ship power distribution, engine room cabling, offshore unit power circuits and fire resistant power supply lines.

Related Cable Pages

For the related marine cable range, see Marine & Offshore Cables. For the applicable shipboard power cable standard guide, see IEC 60092-353 Shipboard Power Cable Guide. To confirm project applicability, certificate scope or TDS, please contact Anhui Tiankang.

Certificate Download and Verification

Use the Download button on this page to get the DNV certificate PDF. For project submission, please confirm the cable type, size, standard and certificate validity with the Anhui Tiankang sales team before order placement. The certificate validity date relates to the type approval certificate and not to the approval of equipment or systems installed.

FAQ

Q1: Which cable types are covered by DNV certificate TAE000050C?

The certificate covers CJ85/NSC, CJ86/NSC, CJ95/NSC and CJ96/NSC XLPE insulated shipboard power cables.

Q2: What is the rated voltage and temperature class?

The rated voltage is 0.6/1kV and the temperature class is 90°C.

Q3: Is this certificate still valid?

The certificate was issued on 2025-01-07 and is valid until 2030-01-06, subject to DNV terms and periodical assessment requirements.

Q4: Does the cable meet fire resistant requirements?

According to the certificate documentation, the cable is fire resistant in accordance with IEC 60331-1 and IEC 60331-2, with circuit integrity testing at 830°C for 120 minutes.

Q5: Can I use this certificate for ship projects classed by other societies?

This document is a DNV type approval certificate. For CCS, ABS, LR, BV or RINA projects, please confirm the applicable certificate or test report with our sales team.

Request Verified Copy

For quotation, TDS, cable size confirmation or a verified certificate copy for project submission, please contact Anhui Tiankang with the cable type, standard, specification, quantity and destination port.