BV Type Approval Certificate 54112/B0 BV

Certificate Overview

This page provides the Type Approval Certificate 54112/B0 BV issued by Bureau Veritas Marine & Offshore to Anhui Tiankang (Group) Shares Co., Ltd. for low voltage marine power cables of the CE and CJ series.

• Certificate number: 54112/B0 BV

• File number: ACE1/848/2

• Product: Cables, low voltage, 0.6/1kV, CE & CJ series

• Rated voltage: 0.6/1kV

• Temperature class: 90°C

• Issued: 12 September 2024 at BV Shanghai

• Expires: 12 September 2029

The certificate attests that Bureau Veritas undertook the relevant approval procedures for the identified product, which was found to comply with Bureau Veritas Rules for the Classification of Steel Ships and the listed IEC standards. The certificate supersedes the previous Type Approval Certificate 54112/A0 BV.

Approved Cable Types and Range

The certificate covers XLPE insulated CJ types and EPR insulated CE types, with flame retardant, fire resistant and halogen free variants:

• CJ85, CJ86, CJ95, CJ96 with /SC or /NC suffix

• CJPJ80, CJPJ85, CJPJ90, CJPJ95 with /SC or /NC suffix

• CJPF80, CJPF86, CJPF86, CJPF96 with /SC or /NC suffix

• CEPF80, CEPF86, CEPF90, CEPF96 with /SC or /NC suffix

• CEPJ80, CEPJ85, CEPJ90, CEPJ95 with /SC or /NC suffix

• CEF series with /SA or /NA suffix

Size coverage: 1 core from 1mm2 to 240mm2, 2 core from 1mm2 to 120mm2, 3 core from 1mm2 to 185mm2, and 4 to 37 core from 1mm2 to 2.5mm2. Construction per the certificate schedule: tinned copper wire or copper wire class 2 conductors, mica tape fire resistant layer on NC types, EPR or XLPE insulation, inner sheath variants, tinned copper wire braid or zinc-coated steel wire braid armour, and SHF1 or SHF2 outer sheath.

Fire and Material Performance

• Flame retardant: IEC 60332-1-2 and IEC 60332-3-22 Category A

• Fire resistant: IEC 60331-1/2 for NA and NC types

• Halogen free: IEC 60754-1/2 for SC and NC types

• Low smoke: IEC 61034-2 for SC and NC types

• Fluorine content: IEC 60684-2 for SC and NC types

Type testing was performed against IEC 60092-350, IEC 60092-353 and IEC 60092-360, with test reports TICW CT16-3471-1/2/3/4 dated 18 September 2016 and Shanghai Intelligent Service and Technology reports TN-24-1612A1E, TN-24-1613A1E and TN-24-1614A1E dated 13 May 2024.

Application and Limitations

The certificate applies to low voltage marine power cables on vessels classed by Bureau Veritas, with the following requirements noted in the certificate:

• The products are to be supplied in compliance with the certified type and requirements

• The product falls within Bureau Veritas Rule Note NR320 category IBV

• A Bureau Veritas product certificate is required — meaning unit certification applies per delivery for BV classed projects, arranged through the surveyor

Cable marking includes rated voltage, core number and cross section, manufacturer name or trademark, optional code designation and Bureau Veritas marks, applied durably along the outer sheath.

Related Certificates

For the companion BV certificate covering instrumentation and communication cables, see BV Type Approval 52351/B0 BV for CK and CH series. For the same cable families under DNV, see DNV Type Approval TAE000050C for NSC fire resistant types, TAE000050D for SC flame retardant types and TAE000050B for PO sheath types. For the same test report family under Nippon Kaiji Kyokai, see NK TA24282M. For the applicable power cable standard, see our IEC 60092-353 guide. For factory qualification under ABS, see the ABS Manufacturing Assessment certificate.

Certificate Download and Verification

Use the Download button on this page to get the Bureau Veritas certificate PDF with the full schedule. For BV classed projects, please confirm the required product certificate per shipment and the applicable cable types with the Anhui Tiankang sales team before order placement.

FAQ

Q1: Which cable types are covered by BV certificate 54112?

The certificate covers CJ and CE series low voltage power cables from 1mm2 to 240mm2, including flame retardant SC, fire resistant NC, and CEF types with SA or NA designations.

Q2: When is this certificate valid?

The certificate was issued on 12 September 2024 and expires on 12 September 2029.

Q3: What does "BV product certificate is required" mean?

Per the certificate schedule, deliveries for BV classed vessels require a Bureau Veritas product certificate per shipment, arranged through the BV surveyor. Anhui Tiankang will support the unit certification process for your order.

Q4: What is the difference between the SC, NC, SA and NA suffixes?

SC means flame retardant halogen free low smoke, NC means fire resistant halogen free low smoke, SA means flame retardant, and NA means fire resistant, each verified by the corresponding IEC test standards listed in the certificate.

Q5: What information is needed for a quotation?

Please send the cable type with suffix, core configuration and size, quantity or length, destination port and whether the project is BV classed, so we can include the unit certification arrangement.

Request Verified Copy

For quotation, TDS, type confirmation or a verified certificate copy, please contact Anhui Tiankang with the cable type, suffix, specification, quantity, destination port and class society requirement.