DNV Type Approval Certificate TAE000050E

Certificate Overview

This page provides the DNV Type Approval Certificate TAE000050E issued to Anhui Tiankang (Group) Shares Co., Ltd. for low voltage shipboard control and instrumentation cables of the CKJ and CHJ series with inner sheath and braid armour.

• Certificate number: TAE000050E

• Product: Low voltage cable, XLPE insulated shipboard control and instrumentation cables

• Rated voltage: 150/250V

• Temperature class: 90°C

• Issued: 7 January 2025 at Hamburg

• Valid until: 6 January 2030

• Issued by: DNV, local unit Nanjing NB & CMC

• DNV Job ID: 262.1-040955-1

The certificate confirms compliance with DNV rules for classification of ships, offshore units and high speed and light craft. Products covered by this certificate are accepted for installation on all vessels classed by DNV, subject to the certificate terms and project requirements.

Approved Cable Types

The certificate covers sixteen type designations in two product families, all with tinned stranded copper class 2 conductors, XLPE insulation, optional electrostatic screen, halogen free inner sheath, copper wire braid or galvanized steel wire braid armour, and SHF1 or SHF2 outer sheath.

• CKJPF86/SC, CKJPF96/SC, CKJPJ85/SC, CKJPJ95/SC: screened shipboard control cables, 2 to 37 cores in sizes from 0.5mm2 to 2.5mm2, for example 7x1.5, 12x1.5, 19x1.5, 24x1.5, 30x1.5 and 37x1.5

• CKJPFP86/SC, CKJPFP96/SC, CKJPJP85/SC, CKJPJP95/SC: screened pair versions of the above control cables

• CHJPF86/SC, CHJPF96/SC, CHJPJ85/SC, CHJPJ95/SC: shipboard communication cables in pairs, triples and quads, sizes from 0.5mm2 to 2.5mm2, up to 37 pairs

• CHJPFP86/SC, CHJPFP96/SC, CHJPJP85/SC, CHJPJP95/SC: individually and collectively screened pair versions for instrumentation duty

Standards and Testing

The type approval is based on the following standards, with type test reports TN24-4514E through TN24-4521E referenced in the certificate:

• IEC 60092-350: general construction and test methods of power, control and instrumentation cables for shipboard and offshore applications

• IEC 60092-376: control and instrumentation cables for rated voltage 150/250V

• IEC 60092-360: insulating and sheathing materials for shipboard and offshore cables

• IEC 60332-3-22 Category A: bunched cable flame retardance

• IEC 60754-1 and IEC 60754-2: halogen free performance

• IEC 60684-2 clause 45.2: low level fluorine content below 0.1%

• IEC 61034-1/2: low smoke emission, light transmittance above 60%

The requirements of SOLAS Amendments Chapter II-1, Part D, Regulation 45.5.2 for limiting fire propagation along bunches of cables are fulfilled without additional measures. Cable marking follows the certificate example, identifying the type designation, rated voltage, size and test reference.

Application

This certificate applies to screened shipboard control and instrumentation cables used for control circuits, automation systems, instrumentation and communication networks on DNV classed vessels, where screened constructions are required for interference control and armour is required for mechanical protection. Typical uses include engine control systems, alarm and monitoring loops, bridge instrumentation and deck machinery control.

Related Certificates

For the low voltage power cable type approvals in the same certificate family, see DNV TAE000050C for NSC fire resistant power cables, TAE000050D for SC flame retardant power cables and TAE000050B for PO sheath power cable types. For the same cable families under Nippon Kaiji Kyokai, see the NK TA24283M type test certificate covering a broader range of NA, NC and DA variants. For fire resistant control types in the same DNV family, see TAE000050F and the no-inner-sheath variant TAE000050H. For the applicable control cable standard, see our IEC 60092-376 guide.

Certificate Download and Verification

Use the Download button on this page to get the DNV certificate PDF with the complete type listing. For project submission, please confirm the cable type, size range, screen configuration and certificate validity with the Anhui Tiankang sales team before order placement.

FAQ

Q1: Which cable types are covered by DNV certificate TAE000050E?

The certificate covers sixteen screened control and instrumentation types: CKJPF, CKJPF86/96, CKJPJ85/95, their screened pair versions CKJPFP and CKJPJP, and the communication cable families CHJPF, CHJPJ, CHJPFP and CHJPJP, all with SC suffix.

Q2: What is the size range?

Control cables cover 2 to 37 cores and communication cables cover 1 to 37 pairs, triples or quads, in conductor sizes from 0.5mm2 to 2.5mm2.

Q3: What is the difference between this certificate and TAE000050B?

TAE000050B covers 0.6/1kV power cables of the CJPF and CJPJ families. TAE000050E covers 150/250V control and instrumentation cables of the CKJ and CHJ families with armour and inner sheath.

Q4: When is this certificate valid?

The certificate was issued on 7 January 2025 and is valid until 6 January 2030, subject to DNV periodical assessment after 2 years and 3.5 years.

Q5: Are fire resistant variants of these types available?

The NK TA24283M certificate covers NA and NC fire resistant variants of the same cable families. For DNV projects requiring fire resistant control types, see TAE000050F.

Request Verified Copy

For quotation, TDS, type confirmation or a verified certificate copy with the type listing attachment, please contact Anhui Tiankang with the cable type designation, size, screen configuration, quantity and destination port.